Miniguard HS-2

Autodial Telephone Entry

12”h x 4.2”w x 2”d

MSRP $ 1590

PN: 02A31112

Flush mount add FM to end of part number (additional $150)

The Miniguard HS-2 is a handset telephone auto dialer for access control in industrial /commercial high noise environments. When the handset is lifted, the Miniguard HS-2 dials a primary telephone number. If the number is busy or does not answer, the HS-2 will hang up and dial up to nine 'backup' numbers. When the call is answered and the visitor is identified, the called individual can press "0" to grant entry or press "9" to activate a camera for visual identification,

	Armored cable handset for high noise environments.
	Ten (10) number rollover.
	Low profile 4.2" door mullion width.
	12 volt AC or 12 volt DC powered.
	(2) 5 amp form "C" dry contact relays.
	Supports all Weigand 26 bit protocol.
	Full duplex communication.
	#316 wraparound stainless steel.
	Up to 12 digit resident telephone numbers.
	Rotary or touch-tone compatible.
	Programmable site ID.
	Remotely programmable from any touch-tone telephone.
	Optional B&W or Color Camera
	Optional Lighted Hood
	Optional Small Flush Mount Back-box

Download the HS-2 Manual

Download Miniguard HS-2 Data Sheet

		GSA Product
		Available at: