The Miniguard HF-2WM is a hands free single
button telephone auto dialer with major applications in
industrial /commercial access control. With the press of
a button, the Miniguard HF-2 dials a primary telephone
number. If the number is busy or does not answer, the
HF-2 will hang up and dial up to nine 'backup' numbers.
When the call is answered and the visitor is identified,
the called individual can press "0" to grant entry or
press "9" to activate a camera for visual
identification,
The Miniguard HF-2WM can be used as a stand-alone entry
host for various types of access cards, through its
26-bit Wiegand protocol interface card.
A call progress lamp is provided on the front of the
unit for the benefit of the hearing impaired. When the
CALL button is pressed, the lamp flashes to indicate a
call being placed. When the call is answered, and the
unit recognizes that someone is speaking to the unit,
the lamp glows continuously.
Rain Gutters around the face front
Built-in L.E.D. Lighting for button
illumination
One button telephone access control
for industrial/commercial buildings.
Ten (10) number rollover.
Low profile 4.2" door mullion
width.
12 volt AC or 12 volt DC powered.
(2) 5 amp form "C" dry contact
relays.
Supports all
Wiegand 26 bit
protocol.
Full duplex communication.
#316 wraparound stainless steel.
Up to 12 digit resident telephone
numbers.
Rotary or touch-tone compatible.
Programmable site ID.
Remotely programmable from any
touch-tone telephone.
