PERFECT FOR GLASS
FRONT ENTRIES!!! Fits EXACTLY on the metal frame!
MULTIPLE FINISHES
AVAILABLE!!
(surface mount only)
.
This photo shows the thin width of the
slim-line. It fits exactly on the metal window
frame for a clean installation. This unit is
currently available as a
surface mount only.
Shown with optional proximity reader
(left)
Shown with optional Dark Bronze
Powder-coat Finish (right) This Finish closely
matches the Bronze mullion found on many glass entries.
The Miniguard HF-2 Slim-line is a hands
free single button telephone auto dialer with major
applications in industrial /commercial access control.
With the press of a button, the Miniguard HF-2 Slim-line
dials a primary telephone number. If the number is busy
or does not answer, the HF-2 will hang up and dial up to
nine 'backup' numbers. When the call is answered and the
visitor is identified, the called individual can press
"0" to grant entry or press "9" to activate a camera for
visual identification (camera mounted separately).
The Miniguard HF-2 can be used as a stand-alone entry
host for various types of access cards, through its
26-bit Weigand protocol interface card.
A call progress lamp is provided on the front of the
unit for the benefit of the hearing impaired. When the
CALL button is pressed, the lamp flashes to indicate a
call being placed. When the call is answered, and the
unit recognizes that someone is speaking to the unit,
the lamp glows continuously.
One button telephone access control
for industrial/commercial buildings.
Remotely located control module up
to 250 ft away
Ten (10) number rollover.
Automatic Hang-up feature
Low profile 2" door mullion
width.
12 volt AC or 12 volt DC powered.
(2) 5 amp form "C" dry contact
relays.
Supports all Weigand 26 bit
protocol.
Full duplex communication.
#316 stainless steel.
Up to 12 digit resident telephone
numbers.
Rotary or touch-tone compatible.
Programmable site ID.
Remotely programmable from any
touch-tone telephone.
