HF-2 with Keypad Entry

Miniguard HF-2 with Keypad Entry

NEW UNIT!

Miniguard HF-2 w/ Keypad Entry

MSRP $1520

($1390 base HF-2 price + $130 for keypad option)

PN: 02A00310

The Miniguard HF-2 with keypad is a hands free single button telephone auto dialer with integrated keypad allowing for major applications in industrial /commercial access control. With the press of a button, the Miniguard HF-2 dials a primary telephone number. If the number is busy or does not answer, the HF-2 will hang up and dial up to nine 'backup' numbers. When the call is answered and the visitor is identified, the called individual can press "0" to grant entry or press "9" to activate a camera for visual identification

The Miniguard HF-2 with keypad allows for up to 200 4-digit entry codes for additional access control options.

A call progress lamp is provided on the front of the unit for the benefit of the hearing impaired. When the CALL button is pressed, the lamp flashes to indicate a call being placed. When the call is answered, and the unit recognizes that someone is speaking to the unit, the lamp glows continuously.

	One button telephone access control for industrial/commercial buildings.
	Integrated keypad allows up to 200 4-digit entry codes
	Keypad is armored allowing it to withstand high traffic
	Ten (10) number rollover.
	Low profile 4.2" door mullion width.
	12 volt AC or 12 volt DC powered.
	(2) 5 amp form "C" dry contact relays.
	Supports all Weigand 26 bit protocol.
	Full duplex communication.
	#316 wraparound stainless steel.
	Up to 12 digit resident telephone numbers.
	Rotary or touch-tone compatible.
	Programmable site ID.
	Remotely programmable from any touch-tone telephone.
	Optional Black & White Camera
	Optional Lighted Hood
	Optional Small Flush Mount Back-box
	Optional interface for various card readers including proximity card readers.
	Optional HF-2 offered as a "Kit" in the accessory section.